Selected Metals - 8: Copper Alloys, Brass
VMS Forum | Library | Start Page | Previous Page| Next Page
WARNING: Machine tools present a safety hazard. Improper operation can result in severe injury. These topics are for non-laboratory study only and are not to be used in conjunction with the operation of any tool or machine described herein. Never use a machine tool without the supervision of a qualified instructor.
Brass, like bronze, is a copper alloy but has a primary alloying element of zinc instead of tin. Zinc alloying of copper to produce brass had been around since the discovery of bronze. However it was not as easy to produce brass and therefore was not as commonly used.

Over the last few centuries the alloying of copper-tin and copper-zinc with other elements has become so nearly alike, and the results so similar, that today there are very few functional differences between bronze and brass. Generally, whatever you can be accomplished with a particular bronze alloy can be accomplished with some other kind of brass alloy and visa versa. However, there is one significant difference worth mentioning. Brass, when polished, looks like gold but bronze does not polish as nicely. So brass has more decorative uses than bronze and - throughout out history - has been used this way.

The two primary brasses of interest are those called by their color because the hue of the metal*s distinguishes it from its siblings. Red brass contains has less zinc (more copper) and yellow brass contains more zinc (less copper). It is not uncommon for the seasoned machinist to request this copper alloy simply by stating its color: "Red Brass" or "Yellow Brass"

C36000

  • Primary alloy Lead
  • Machinability the best of the brass family
  • Weldability soldering and brazing
  • Applications screw machine products
  • Comments the most free machining of all metal*s. The standard by which all brass machinability is judged.

C35300

  • Primary alloy lead
  • Machinability almost as good as C3600
  • Weldability soldering and brazing
  • Applications screw machine products, hose fittings, lock parts.
  • Comments less free machining than C3600 but more formable for forgings, cold heading, etc.

C35300

  • Primary alloy iron
  • Machinability poor for brass
  • Weldability soldering and brazing
  • Applications electrical hardware, fasteners, fittings
  • Comments a cold form brass that is machined after heading.
VMS Forum | Library | Start Page | Previous Page| Next Page

label: stainless steel, aisa, sae, aluminum, copper, tool steel, history of metal